홈>
Fedora 29를 Asus X542U에 설치했습니다. 이제 팬이 항상 작동하며 제어 할 수 없습니다. 나는
sudo modprobe asus_laptop
를 시도
명령이지만 결과는 다음과 같습니다.
modprobe: ERROR: could not insert 'asus_laptop': No such device
또한 입력했습니다
dmesg | grep asus
결과는
[ 5.353567] asus_wmi: ASUS WMI generic driver loaded
[ 5.358125] asus_wmi: Initialization: 0x1
[ 5.358180] asus_wmi: BIOS WMI version: 9.0
[ 5.358216] asus_wmi: SFUN value: 0x21
[ 5.359322] input: Asus WMI hotkeys as /devices/platform/asus-nb-wmi/input/input20
[ 5.359947] asus_wmi: Number of fans: 0
[ 9813.808938] asus_wmi: Unknown key cf pressed
asus_wmi: Number of fans: 0
를 볼 수 있습니다
.
또한
fancontrol
를 확인했습니다
서비스
➜ ~ fancontrol
Loading configuration from /etc/fancontrol ...
Error: Can't read configuration file
➜ ~ systemctl status fancontrol
● fancontrol.service - Start fan control, if configured
Loaded: loaded (/usr/lib/systemd/system/fancontrol.service; disabled; vendor>
Active: inactive (dead)
fancontrol
를 시작했습니다
이 명령으로 서비스 :
systemctl start fancontrol
다시 작동하지 않습니다
➜ ~ systemctl status fancontrol
● fancontrol.service - Start fan control, if configured
Loaded: loaded (/usr/lib/systemd/system/fancontrol.service; disabled; vendor preset: disabled)
Active: inactive (dead)
sensors
의 출력에 팬 정보가 없습니다
명령
➜ ~ sensors
ath10k_hwmon-pci-0300
Adapter: PCI adapter
temp1: +91.0°C
coretemp-isa-0000
Adapter: ISA adapter
Package id 0: +46.0°C (high = +100.0°C, crit = +100.0°C)
Core 0: +45.0°C (high = +100.0°C, crit = +100.0°C)
Core 1: +45.0°C (high = +100.0°C, crit = +100.0°C)
Core 2: +44.0°C (high = +100.0°C, crit = +100.0°C)
Core 3: +45.0°C (high = +100.0°C, crit = +100.0°C)
어떻게해야합니까?
내 시스템 :
➜ ~ inxi -Fxxx
System: Host: localhost.localdomain Kernel: 4.19.5-300.fc29.x86_64 x86_64 bits: 64 compiler: gcc v: 8.2.1
Desktop: Gnome 3.30.2 wm: gnome-shell dm: GDM 3.30.1 Distro: Fedora release 29 (Twenty Nine)
Machine: Type: Laptop System: ASUSTeK product: X542URR v: 1.0 serial: <root required>
Mobo: ASUSTeK model: X542URR v: 1.0 serial: <root required> UEFI [Legacy]: American Megatrends
v: X542URR.303 date: 12/04/2017
Battery: ID-1: BAT0 charge: 35.8 Wh condition: 35.8/38.0 Wh (94%) volts: 7.6/7.6 model: ASUSTeK ASUS Battery
type: Li-ion serial: status: Not charging cycles: 8
Device-1: hidpp_battery_0 model: Logitech K520 serial: 2011-1b-bd-5d-c3
charge: 70% (should be ignored) rechargeable: yes status: Discharging
Device-2: hidpp_battery_1 model: Logitech Wireless Mouse serial: 4055-57-b5-45-59
charge: 55% (should be ignored) rechargeable: yes status: Discharging
CPU: Topology: Quad Core model: Intel Core i7-8550U bits: 64 type: MT MCP arch: Kaby Lake rev: A
L2 cache: 8192 KiB
flags: lm nx pae sse sse2 sse3 sse4_1 sse4_2 ssse3 vmx bogomips: 31872
Speed: 1450 MHz min/max: 400/1800 MHz Core speeds (MHz): 1: 1450 2: 1380 3: 1464 4: 1564 5: 1567
6: 1499 7: 1450 8: 1390
Graphics: Device-1: Intel UHD Graphics 620 vendor: ASUSTeK driver: i915 v: kernel bus ID: 00:02.0
chip ID: 8086:5917
Device-2: NVIDIA GM108M [GeForce 930MX] vendor: ASUSTeK driver: nvidia v: 410.78 bus ID: 01:00.0
chip ID: 10de:134e
Display: x11 server: Fedora Project X.org 1.20.3 driver: nvidia compositor: gnome-shell
resolution: 1920x1080~60Hz, 1920x1080~60Hz
OpenGL: renderer: GeForce 930MX/PCIe/SSE2 v: 4.6.0 NVIDIA 410.78 direct render: Yes
Audio: Device-1: Intel Sunrise Point-LP HD Audio vendor: ASUSTeK driver: snd_hda_intel v: kernel
bus ID: 00:1f.3 chip ID: 8086:9d71
Sound Server: ALSA v: k4.19.5-300.fc29.x86_64
Network: Device-1: Realtek RTL8111/8168/8411 PCI Express Gigabit Ethernet vendor: ASUSTeK driver: r8169
v: kernel port: d000 bus ID: 02:00.0 chip ID: 10ec:8168
IF: enp2s0 state: up speed: 1000 Mbps duplex: full mac: 4c:ed:fb:0b:4e:84
Device-2: Qualcomm Atheros QCA9377 802.11ac Wireless Network Adapter vendor: AzureWave
driver: ath10k_pci v: kernel port: d000 bus ID: 03:00.0 chip ID: 168c:0042
IF: wlp3s0 state: up mac: 80:c5:f2:79:4a:4b
IF-ID-1: virbr0 state: down mac: 52:54:00:81:88:26
IF-ID-2: virbr0-nic state: down mac: 52:54:00:81:88:26
IF-ID-3: vmnet1 state: unknown speed: N/A duplex: N/A mac: 00:50:56:c0:00:01
IF-ID-4: vmnet8 state: unknown speed: N/A duplex: N/A mac: 00:50:56:c0:00:08
Drives: Local Storage: total: 2.26 TiB used: 1.24 TiB (54.8%)
ID-1: /dev/sda vendor: Toshiba model: Q300. size: 447.13 GiB speed: 6.0 Gb/s serial: 97KB50IPKQ4U
rev: 12.3 scheme: MBR
ID-2: /dev/sdb vendor: HGST (Hitachi) model: HTS541010B7E610 size: 931.51 GiB speed: 6.0 Gb/s
rotation: 5400 rpm serial: WXW1E87AVA83 rev: 1A03 scheme: GPT
ID-3: /dev/sdc type: USB vendor: Toshiba model: MQ01ABD100 size: 931.51 GiB serial: 20171212
scheme: MBR
Partition: ID-1: / size: 48.97 GiB used: 20.13 GiB (41.1%) fs: ext4 dev: /dev/dm-0
ID-2: /boot size: 975.9 MiB used: 183.5 MiB (18.8%) fs: ext4 dev: /dev/sda1
ID-3: /home size: 381.23 GiB used: 32.14 GiB (8.4%) fs: ext4 dev: /dev/dm-2
ID-4: swap-1 size: 7.80 GiB used: 728.2 MiB (9.1%) fs: swap dev: /dev/dm-1
Sensors: System Temperatures: cpu: 44.0 C mobo: N/A gpu: nvidia temp: 43 C
Fan Speeds (RPM): N/A
Info: Processes: 320 Uptime: 5h 47m Memory: 7.67 GiB used: 4.56 GiB (59.5%) Init: systemd v: 239
runlevel: 5 target: graphical.target Compilers: gcc: 8.2.1 Shell: zsh v: 5.6.2
running in: gnome-terminal inxi: 3.0.26
<시간>
redhat bugzilla
- 답변 # 1
관련 자료
- Python PyQt 신호가 항상 작동하는 것은 아닙니다
- elasticsearch - Filebeat 793 변경 인덱스가 작동하지 않고 항상 기본 filebeat-793-20201104-000001을 생성합니다
- php - URL이 작동하지 않거나 리디렉션되었는지 확인하고 항상 작동하지는 않습니다
- c++ - 클래스 멤버 함수로 작업 할 때 참조로 전달하는 대신 항상 값으로 전달 (사본 작성)하는 방법이 있습니까?
- mysql - 왜이 쿼리가 항상 phpmyadmin에서 작동하지만 내 PHP pdo 코드에서 때때로 작동합니까?
- type() not working with input() and always returns "str" - type ()은 input ()과 작동하지 않으며 항상 "str"을 반환합
- php - phpmailer - 작동 할 때 항상 메시지 표시
팬 제어와 관련된 설정에 대해 시스템 BIOS를 확인 했습니까? HP 랩톱에서도 비슷한 문제가 발생하여 거기서부터 정리했습니다.